Sitework Layout
Grading & Earthwork
Building Layout
Foundations & Columns
As-Built Surveys
Record Documentation
Machine Control
3D Models & GPS Grading
Construction Stakeout Services
Translating Design Plans Into Field Reality
Construction stakeout is the critical link between engineering design and physical construction. Our survey crews translate CAD drawings and engineering plans into precise field locations that guide contractors through every phase of site development, from initial rough grading through final as-built documentation.
Why Construction Stakeout Matters
Contractors depend on accurate stakeout to build projects according to approved plans. A misplaced foundation, incorrectly graded parking lot, or utility line at the wrong elevation can result in costly rework, project delays, and compliance failures. Professional construction stakeout eliminates these risks.
Wilkinson & Associates provides responsive construction stakeout services that keep projects on schedule. Our crews understand construction workflows and coordinate closely with site contractors to deliver stakes when needed, where needed. We catch plan discrepancies before they become field problems.
Why Contractors Choose Wilkinson for Stakeout
- Responsive scheduling to meet construction timelines
- Experienced crews who understand construction workflows
- Pre-stakeout plan review to catch discrepancies
- GPS and robotic technology for precision and efficiency
Site Control and Benchmarks
Every construction stakeout begins with establishing reliable site control. Our crews set primary control points and benchmarks that tie the project to the design coordinate system. This control network becomes the foundation for all subsequent stakeout work, ensuring consistency from first stake to final as-built.
- Primary and secondary control point establishment
- Benchmark setting and verification
- GPS base station setup and calibration
- Coordinate system localization
- Control point recovery and replacement
Sitework and Grading Stakeout
Mass grading and site preparation require accurate cut and fill stakes to guide earthwork operations. Our crews stake rough grading limits, slope stakes, subgrade elevations, and fine grading points that allow contractors to move dirt efficiently while meeting design specifications.
- Rough Grading Stakes — Cut and fill elevations for mass earthwork
- Slope Stakes — Grade breaks, berms, and slope transitions
- Subgrade Verification — Pavement subbase elevation checks
- Detention Basin Staking — Pond limits, outlet structures, and grading
- Erosion Control Layout — Limit of disturbance, silt fence, and sediment basin layout
Utility Stakeout
Underground utility installation requires precise horizontal and vertical positioning. Our crews stake sanitary sewer, storm drainage, water mains, and other utilities with the accuracy needed to meet slope requirements and ensure proper connections. We provide both offset stakes for excavation and direct staking for structure placement.
⚠️ Utility Note: Gravity sewer systems are particularly sensitive to grade accuracy. Even small elevation errors can affect flow and require costly corrections. Our crews verify invert elevations at each structure and provide cut sheets with the precision utility contractors require.
Sanitary sewer lines and manholes
Storm sewer pipes and inlets
Water main layout
Fire hydrant locations
Detention outlet structures
Gas and electric coordination
Telecom duct banks
Utility crossing elevations
Building Layout
Precise building layout ensures structures are correctly positioned within property limits and meet setback requirements. Our crews stake foundations, column lines, and anchor bolt locations with the accuracy required for structural steel erection and concrete placement.
FOUNDATION
Footings, walls, and slab edges staked to plan
COLUMN LINES
Grid lines for steel and concrete columns
ANCHOR BOLTS
Precise location for steel erection
- Foundation corner and wall staking
- Column grid layout
- Anchor bolt template verification
- Floor elevation benchmarks
- Vertical plumbness checks for multi-story construction
Roads, Curbs, and Pavement
Road and pavement construction requires continuous grade control to achieve proper drainage and meet design specifications. Our crews stake centerlines, curb lines, and grade points that guide paving operations from subbase through final surface.
- Road centerline and edge staking
- Curb and gutter layout
- Sidewalk alignment and grade
- ADA ramp locations and slopes
- Light pole and signage locations
- Pavement grade verification
Heavy Highway & Bridge Layout
Heavy highway and bridge construction demands high-precision control and coordination across multiple phases of work. Our crews provide accurate layout for structural components, roadway alignments, and elevation control to support complex infrastructure projects from substructure through final deck placement.
Highway Alignment — Horizontal and vertical control for roadway construction and widening projects.
Bridge Substructure — Accurate layout for abutments, piers, footings, and bearing seats.
Bridge Superstructure — Precise control for girders, deck forms, and expansion joints.
- Control network establishment and verification
- Abutment and pier staking
- Bearing seat and anchor bolt layout
- Girder setting control
- Deck grade and screed rail layout
- Expansion joint and barrier wall layout
- Approach slab and tie-in alignment
- As-built verification of structural components
- Boundary and topographic survey
3D Modeling and Machine Control
Modern earthmoving equipment can operate directly from 3D design models, reducing or eliminating the need for grade stakes. Wilkinson & Associates prepares digital terrain models and exports files in formats compatible with Topcon, Trimble, and other machine control systems, enabling GPS-guided grading operations.
- 3D surface model creation from design plans
- Machine control file export (Topcon, Trimble formats)
- GPS base station setup and calibration
- Grade verification during machine-controlled operations
- Model updates for field changes
As-Built Surveys
As-built surveys document what was actually constructed, providing the record drawings required for project closeout and bond release. We survey completed improvements and prepare as-built drawings that show final locations, elevations, and dimensions.
- Foundation as-built for setback verification
- Utility as-built with invert elevations
- Final grade verification surveys
- Stormwater facility as-builts
- Record drawing preparation
Construction Stakeout Services
Translating Design Plans Into Field Reality
Site Control & Benchmarks
- Primary control point establishment
- Benchmark setting and verification
- GPS base station calibration
- Coordinate system localization
- Construction datum establishment
Sitework & Grading Stakes
- Mass grading cut/fill stakes
- Building pad grading/verification
- Subgrade verification
- Slope and swale staking
- Detention basin staking
Utility Layout
- Sanitary sewer lines & manholes
- Storm drainage structures
- Water main layout
- Fire hydrant locations
- Electric and telecom coordination
Building Layout
- Foundation staking
- Column line layout
- Anchor bolt verification
- Floor elevation control
- Vertical plumbness checks
Heavy Highway & Bridge Layout
- Road centerline staking
- Curb and gutter layout
- Detail bridge layout
- ADA ramp locations
- Pavement grade control
Project Experience
Our construction stakeout experience spans the full range of project types, from single-building commercial sites to large-scale residential subdivisions and heavy civil infrastructure.
Commercial Site Development
Residential Subdivisions
Industrial and Warehouse
Roadway and Highway
Bridge and Tunnel
Airport Projects
Utility Infrastructure
Municipal Improvements
Ready to Start Construction?
Contact Wilkinson & Associates to discuss your construction stakeout requirements. We coordinate with your project schedule to deliver stakes when your contractor needs them.